1. Suitable for gas station, petroleum and chemical industries, coal mine, military, airport, warehouse, marine etc.
2. Zone1 & Zone2 gaseous environment, and Zone21 & Zone22 dust environment.
3. Class I Division 2 Group A, B, C, D
A hazardous location is defined as a place where concentrations of flammable gases, vapors or dust occur.
Electrical equipment that must be installed in such locations is specially designed and tested to ensure it does not initiate an explosion,
due to arcing contacts or high surface temperature of the equipment.
Explosion proof lighting that can be used in a range of settings is not necessarily the same as hazardous.
For instance, explosion proof can be used in commercial kitchens to avoid accidents caused by shattered light fixtures.
| ITEM NO. | RLEP-J40 | RLEP-J100 | RLEP-J200 |
| TOTAL POWER | 30w | 100w | 185w |
| Replace HPS | 150w | 300-350w | 700-1000w |
| Dimension | 200*200*270mm | 300*300*175mm | 400*400*185 |
| Weight | 4KG | 7.5KG | 12KG |
| Reflector/ wide angle | 120 | wide angle | wide angle |
| Nominal lumens | 3480lm | 11600lm | 20880lm |
| Driver Current | 350mA |
| # OF LEDS | 24 | 84 | 156 |
| System Efficacy | 116 LM/W |
| Light Color option | 5700/4000/2700K |
| Materia | Die Cast Aluminum |
| Wide AC input | 90-305 VAC |
| Power Factor | 0.98 |
| Total Harmonic Distortion | < 10% |
| Surge protection | IEC/EN 61000-4-5 |
| Operation temp | -30 ºC to +50 ºC |
| IP class | 68 |
| Rated Life | 100,000+ hrs |
| Warranty | 5 years |
| Certificate | ROHS CE DLC ATEX SAA PSE C-TICK |
1. UL TUV CB EMC CE certified MW
HLG series power driver, IP67 protective level, 7 years warranty.
2. The integration of reflective optical design,install directly in the light body,
make the light more focus and comfortable for eyes.
3. High pressure die casting alloy aluminum housing, create through high pressure(1600
ton) in one piece,high explosion proof level and IP68 waterproof protection.
4. LED chip with 2.0mm thick Aluminum PCB board installed directly onto Aluminum Shell. As a result,
the whole lamp is integrated as a radiator for the LED chips. Besides,the distance of LEDS are good
enough for spreading heat, to ensure long lifespan, and with special circuit design, each LED chip
won’t affect the others when fail to work, so the lamp will keep working even if some LED chips stopped.
